Click a heading to jump to a section. Click a photo to enlarge and read more. Enlarge several items and drag if you wish.
Brakes and Suspension
Engine and Transmission
Interior Accessories
Exterior Accessories
GT40 Accessories
Goodies
Brakes and Suspension
|
Big brakes installed on a car. We recommend you have Olthoff Racing install this upgrade.
 |
Factory pads vs upgraded pads. This pad increases area by 50% and thickness by 80%.
|
CNC billet hub specifically made for this application includes bearings, races, lug studs and grease seals, (not shown).
|
Big Wilwood caliper incorporates heat shields to reflect heat away from the fluid contained within.
|
Brake rotor diameter increases from 11.750 to 12.190 and rotor thickness from 1.050 to 1.250 inches. Aluminum hat saves weight and rotor has 48 cooling vanes.
 |
These braided stainless steel brake hoses improve pedal feel.
|
Custom caliper mounting bracket. Make sure to let us know your car serial number when ordering, as different spindles have been used through the years.
|
The Olthoff rear swaybar upgrade improves corner entry and control through the corner. Poly-urethane bushings and hardware included.
|
The stock rubber front swaybar bushings are quite soft and tend to split over time. These poly-urethane replacements stiffen up the response and action is more positive.
The stock rubber front swaybar bushings are quite soft and tend to split over time. These poly-urethane replacements stiffen up the response and action is more positive.
|
If you want a more positive ride, get these Olthoff race shocks. Dennis worked directly with Bilstein until he was satisfied with the special valving, special spring rate, nitrogen charged and fully rebuildable shocks.
|
Have Olthoff Racing install power steering on your Cobra!
|
We have many more OLTHOFF EXCLUSIVE parts for the GT40 check back here soon! Olthoff has created - upgraded radiator shroud and fans - front hood supports - gas strut rear hood supports - improved GT40 window hinges and more!
|
|
|
|
|
|
|
Engine and Transmission
This oil bypass valve is adjustable (no tools) to divert engine oil from the cooler during drives on cold winter days. Allowing proper oil operating temperature.
|
This valve replaces your existing remote oil filter mount at same location.
|
Rugged CNC billet machined unit.
 |
The adapter mounts to engine block at oil filter location.
|
High quality billet unit with large ports.
|
Engraved arrows show direction of oil flow.
|
Big block torque requires a tough engine mount. These poly-urethane mounts can handle it. Bolt the aluminum plate to the block, then bolt the mount to the plate. Minor cutting of engine pedestal required (instructions included).
|
Tired of your sidepipes hitting the body due to engine torque. Standard rubber mounts can't do the job. These poly-urethane smallblock Ford mounts isolate engine vibration yet stop engine rotation.
|
If you have a Windsor engine and want the look of a FE big block, these valve cover adaptors allow you to bolt on Pentroof FE valve covers.
|
|
|
|
|
|
|
|
|
|
Interior Accessories
CNC machined billet aluminum shifter knob with Olthoff Racing logo engraved into face.
|
Our friend Bob Jordan came up with this VERY popular "Jordan" shifter. The throw is short and the feel "just right".
|
CNC machined billet knob with 5 speed Tremec shift pattern.
|
This arm rest/storage box is great for storing sunglasses, cell phones, gloves and garage door openers
|
Foam padded lid makes a great arm rest while cruising. Magnetic latch for lid, Velcro attachment to transmission tunnel carpet.
|
"Non-secure" storage for all those things that like to find their way under the seats or under your feet while driving.
|
These bolt-on extensions for the clutch and brake pedals allow you to move the seat back, putting your shoulders further away from the steering wheel (belly too) for better steering control. Modified gas pedal (not shown) required for Cobra. The coupe comes with adjustable gas pedal from factory. These are not used for the GT40
|
Small part - BIG DIFFERENCE! These seat spacers raise the front of the seat, putting your shoulders a little further back from the steering wheel, and raises the seat cushion slightly to support your thighs. You sit 'in' the seat more.
|
Add some more flash with this billet steering wheel center cap. Olthoff Racing logo machined into face.
|
Rear view mirrors are great if you can see more than the rear fender. This billet mirror base for the Daytona Coupe raises the outside mirror so you can see over the rear fender.
|
Coupe mirror mount installed.
|
This split billet mount is for installing racing shoulder harnesses in your Daytona Coupe. Fits around the factory rollbar. Works for passenger side also.
|
|
|
|
|
|
|
Exterior Accessories
There's nothing in front of your Cobra radiator to protect it unless you have this stainless steel screen from Olthoff. Welded wire screen keeps its shape. Simple four screw mounting.
|
Your Cobra engine oil cooler is mounted very low and is a target for all sorts of stones and debris. Protect it with this stainless steel screen. Installation instructions and special long drill bit included.
|
Here are both screens installed. Remove 4 screws to clean the radiator, no tools needed to remove oil cooler screen.
|
Having trouble seeing at night? Brighten the road ahead with this upgrade.
|
The upgrade fits your existing headlight bucket and features a replaceable lamp.
|
|
Do your passengers ever ask "Why don't I have a rollbar on my side?" This full-width four point rollbar is custom built and installed in our shop.
|
This is not a "Do it yourself" project. Your choice of chrome or powdercoat finish. Options can also include a forward leg(5 point), diagonal main hoop brace and also side door bars.
|
|
|
|
|
|
|
|
|
|
|
GT40 Accessories
Get these CNC billet GT40 wheel center caps to finish it all off.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Goodies
It doesn't matter which Superformance car you own. To get those wheel spinners off you'll want this lead hammer. Look in the 'Tips and Tricks' section of this website for an upcoming video about maintaining your spinners.
|
Let them all know this is YOUR space!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Parts and Accessories