GT 40 Standard Equipment

PrintE-mail

The GT 40 comes in 3 versions. Here are the lists of standard equipment you get with each version:

The GT40 MKI

 

  • A complete factory assembled rolling chassis.
  • Vinylestere and glass composite body.
  • Show quality PPG paint finishes with many standard colors.
  • Fully independent front and rear suspension.
  • Tubular space frame constructed of mild steel.
  • Bilstein® coil over progressive shocks with H&R Springs®.
  • Four-wheel vented disc brakes, power assisted PBR® calipers.
  • Aluminum radiator/oil cooler with dual electric fans.
  • Original style monocoque chassis.
  • Pressed steel roof.
  • Original style suspension.
  • Custom Bilstein Shocks and H & R springs.
  • Show quality paint finishes available in a variety of colors.
  • Right and Left-hand drive models available.
  • Shifter & Handbrake located in center of tunnel.
  • Original style seats with silver rivets.
  • Oil cooler and braided lines.
  • Air-conditioner delete
  • Canard wings
  • Roll bar
  • Loose carpet driver and passanger side
  • Aluminum adjustable spoiler plate
  • Race grade brake pads and fluid
  • Fuel pump wired and terminated at rear of car
  • Exterior and interior emergency power shut off
  • Windshield wiper race capable
  • Improved race sway bars
  • 5 3/4" Driving lights with turn signal
  • Fan motor with side and windhield vents

 

 

The GT40 MKII

 

  • A complete factory assembled rolling chassis.
  • Vinylestere and glass composite body.
  • Show quality PPG paint finishes with many standard colors.
  • Fully independent front and rear suspension.
  • Tubular space frame constructed of mild steel.
  • Bilstein® coil over progressive shocks with H&R Springs®.
  • Four-wheel vented disc brakes, power assisted PBR® calipers.
  • Aluminum radiator/oil cooler with dual electric fans.
  • Original style monocoque chassis.
  • Pressed steel roof.
  • Original style suspension.
  • Custom Bilstein Shocks and H & R springs.
  • Show quality paint finishes available in a variety of colors.
  • Right and Left-hand drive models available.
  • Shifter & Handbrake located in center of tunnel.
  • Original style seats with silver rivets.
  • High capacity air-conditioner.
  • Oil cooler and braided lines.
  • Center engine scoop.
  • Double brake lights.
  • Bolt on adjustable spoiler.
  • Halibrand style wheels.
  • Agressive snorkels.
  • Single scoop hood insert.
  • Accomidates big or small block engines.

 

 

The GT40R

 

  • A complete factory assembled rolling chassis.
  • Vinylestere and glass composite body.
  • Show quality PPG paint finishes with many standard colors.
  • Fully independent front and rear suspension.
  • Tubular space frame constructed of mild steel.
  • Bilstein® coil over progressive shocks with H&R Springs®.
  • Four-wheel vented disc brakes, power assisted PBR® calipers.
  • Aluminum radiator/oil cooler with dual electric fans.
  • Original style monocoque chassis.
  • Pressed steel roof.
  • Original style suspension.
  • Custom Bilstein Shocks and H & R springs.
  • Show quality paint finishes available in a variety of colors.
  • Right and Left-hand drive models available.
  • Shifter & Handbrake located in center of tunnel.
  • Original style seats with silver rivets.
  • Oil cooler and braided lines.
  • Air-conditioner delete
  • Canard wings
  • Roll bar
  • Loose carpet driver and passanger side
  • Aluminum adjustable spoiler plate
  • Race grade brake pads and fluid
  • Fuel pump wired and terminated at rear of car
  • Exterior and interior emergency power shut off
  • Windshield wiper race capable
  • Improved race sway bars
  • 5 3/4" Driving lights with turn signal
  • Fan motor with side and windhield vents

 

 

Your Thoughts

What is the make of your primary vehicle?